Results 1 to 2 of 2

Thread: Looking for a pair of Model 19 crossovers

  1. #1
    Inactive Member johnsonad's Avatar
    Join Date
    January 5th, 2009
    Posts
    24
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Looking for a pair of Model 19 crossovers

    Hello,

    I was wondering of one of you guys would be willing to part with a pair of Model 19 crossovers? I don't want to mess with the pair in my speakers out of fear of messing them up somehow. I wouldn't feel so bad with a donor set. I plan to recap and clean them up a little before putting them into service. PM me if you have a set to spare.

    Thanks,

    Aaron

  2. #2
    HB Super Moderator
    Looking for a pair of Model 19 crossovers


    Altec Best's Avatar
    Join Date
    June 10th, 2008
    Location
    Central New Jersey
    Posts
    4,225
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    12 Post(s)

    Re: Looking for a pair of Model 19 crossovers

    Quote Originally Posted by johnsonad View Post
    Hello,

    I was wondering of one of you guys would be willing to part with a pair of Model 19 crossovers? I don't want to mess with the pair in my speakers out of fear of messing them up somehow. I wouldn't feel so bad with a donor set. I plan to recap and clean them up a little before putting them into service. PM me if you have a set to spare.

    Thanks,

    Aaron
    Hi Aaron, You are supposed to post these in the classified section under: WTB

    The board is for discussion.Buying & Selling is usually done at the classified section.

    But if you check eBay they come up quite frequently. :2thumbsup: At around $150-$250 Pair.

    BTW - There is really nothing to mess-up if you just swap out the same value Caps & Resistors you shouldn't have a problem and bypass the ground lugs with point to point wire connections/solder joints and have the L-Pad cleaned, you will have a much better sounding Crossover.I used Solen Caps,Dayton Resistors,they are not expensive and good quality.

    Good Luck and Kind Regards ~ John

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This forum has been viewed: 24457465 times.